014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-Bandenpompen met automatische vulling Wordt geleverd met ADR 1

Wordt geleverd met ADR 1

These pumps are advised for the transfer of low-high viscosity of and similar for medium-long distances

Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives

for a correct use

014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-Bandenpompen met automatische vulling Wordt geleverd met ADR 1It is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.